Introduction

The NS6129 deserializer chip is compliant to Automotive Wired High-Speed Media Transmission (HSMT) standard. Pairing with a compatible HSMT serializer, the NS6129 is used for transmission of forward video and bidirectional audio and control data for automotive display applications. The NS6129 receives the HSMT input over a single or dual HSMT links and converts the input to OpenLDI formatted output. Each HSMT link operates at a fixed data rate up to 12.8Gbps in the forward direction and 100Mbps in the backward direction. The NS6129 supports 15 meters Coaxial cable or 8 meters Shielded Twisted Pair (STP) cable at 12.8Gbps. The NS6129 is AEC-Q100 Grade 2 certified with automotive temperature range of -40°C to +105°C, and meets ISO 10605 and IEC 61000-4-2 ESD requirements.

The NS6129 is ISO 26262 ASIL-B certified and supports I2C and SPI control ports, flexible GPIO with trigger mode, constant latency mode and oversample mode, tunneled UART, forward and backward audio channels, a built-in ADC, temperature sensor, and an extensive set of diagnostics for functional safety.

Applications

·           High-resolution Automotive Navigation System

·           Central Information Display (CID)

·           Digital Instrument Clusters

·           Rear Seat Entertainment (RSE)

·           Head Units and HMI Modules

·           Rear View and Side Mirror Displays

Features

       ·           Single-oLDI or dual-oLDI output ports

           ·           Configurable 18/24/30-bit RGB

           ·           Maximum pixel clock 210MHz (single-oLDI) or 420MHz (dual-oLDI)

           ·           Supports video aggregation

       ·           Two HSMT links for system and power flexibility

           ·           2.0, 3.2, 4.0, or 6.4Gbps forward-link rates (NRZ)

           ·           8.0 or 12.8Gbps forward-link rates (PAM4)

           ·           100Mbps backward-link rate

      ·           Robust communication in automotive environment

           ·           Forward channel adaptive equalization

           ·           RS-FEC for protection of forward video and bidirectional control data

           ·           Video data error correction and retransmission

           ·           Advanced DSP continuously tracking changes in cable, connector, PCB and other channel characteristics over time and temperature

      ·           Digital audio with I2S and TDM interface

          ·           Supports forward-direction 7.1 HD audio and up to 192kHz sample rate

          ·           Supports backward-direction 8 channels at 48kHz sample rate or 2 channels at 192kHz sample rate

      ·           Supports bulk and tunneling modes I2C (master up to 833Kbps, slave up to 1Mbps)

      ·           Supports SPI (master/slave up to 50Mbps), UART (Tx/Rx), GPIO, and interrupt for touch-screen and other use cases

      ·           AEC Q100 Grade-2 and ISO 26262 ASIL-B

      ·           CRC protection of control-channel data (I2C and SPI)

      ·           Supports image enhancement features

      ·           Video watermark and test pattern generation

      ·           Supports line fault detection and voltage monitor

      ·           Programmble spread spectrum for EMI reduction

      ·           9mm x 9mm 76-pin QFN package