The NS6238 serializer chip is compliant to Automotive Wired High-Speed Media Transmission (HSMT) standard. Pairing with a compatible HSMT deserializer, the NS6238 converts DisplayPort/eDP input to dual HSMT outputs for transmission of forward video and bidirectional audio and contro l data. Each HSMT link operates at a data rate up to 12.8Gbps in the forward direction and 100Mbps in the backward direction. The NS6238 suppo rts 15 meters Coaxial cable or 8 meters Shielded Twisted Pair (STP) cable at 12.8Gbps. The NS6238 is AEC-Q100 Grade 2 certified with autom otive temperature range of -40°C to +105°C, and meets ISO 10605 and IEC 61000-4-2 ESD requirements.
The NS6238 supports I2C and SPI control ports, flexible GPIO with trigger mode, constant latency mode and oversample mode, tunneled UART, forward and backward audio channels, a built-in ADC, temperature sensor, and an extensive set of diagnostics.
· High-resolution Automotive Navigation System
· Central Information Display (CID)
· Digital Instrument Clusters
· Rear Seat Entertainment (RSE)
· Head Units and HMI Modules
· Rear View and Side Mirror Displays
· Single DisplayPort input port
· 24/30-bit RGB, and 16/20-bit YUV422
· DP/eDP v1.4 compliant
· 1/2/4-lane main link with up to 5.4Gbps/lane
· Hot Plug Dectect and AUX Channel (1Mbps)
· Supports SST or four MST streams
· Supports 4K@60Hz resolutions
· Supports superframe unpacking to up to four video streams
· HSMT link for system and power flexibility
· Supports two HSMT links
· 2.0, 3.2, 4.0, or 6.4Gbps forward-link rates (NRZ)
· 8.0, or 12.8Gbps forward-link rates (PAM4)
· 100Mbps backward-link rate
· Robust communication in automotive environment
· Backward channel adaptive equalization
· RS-FEC for protection of forward video and bidirectional control data
· Retransmission
· Backward channel eye timing margin monitor for continuous link margin diagnosis
· Digital audio with I2S and TDM interface
· Supports forward-direction 7.1 HD audio and up to 192kHz sample rate
· Supports backward-direction 8 channels at 48kHz sample rate or 2 channels at 192kHz sample rate
· Supports bulk and tunneling modes I2C (master up to 833Kbps, slave up to 1Mbps)
· Supports SPI (master/slave up to 50Mbps), UART (Tx/Rx), GPIO, and interrupt for touch-screen and other use cases
· CRC protection of control data over I2C and SPI
· Video watermark and test pattern generation
· Supports line fault detection and voltage monitor
· Programmble spread spectrum for EMI reduction
· 9mm x 9mm 64-pin QFN package
Figure 1. Application Example
Figure 2. NS6238 Pinout